Who you’re working with
- Seven of our consultants are Licensed Asbestos Assessors.
- Asbestos samples are tested in our own NATA-accredited laboratory.
- Our survey reports are accepted by SafeWork, local councils and certifiers.
- We have 4.9 stars from over 650 Google reviews.
Prices at a glance
- Residential asbestos inspection and report typically from $1,485 including GST
- Asbestos survey for strata common areas and small commercial buildings typically from $3,000 including GST
- Asbestos clearance inspection and certificate after non-friable (firmly bound) asbestos removal typically from $495 including GST
- New asbestos register typically from $1,815 including GST
- Asbestos register review or update typically from $1,540 including GST
- Residential mould inspection and report typically from $1,485 including GST
- Asbestos air monitoring typically from $550 a weekday including GST
- Asbestos sample testing $110 including GST per sample
What does a residential asbestos inspection cost?
Typically from $1,485 including GST.
Most jobs are $1,400 to $2,150.
An inspection of a smaller home, such as an apartment, can cost less.
Our consultant inspects the agreed accessible areas, usually in one visit. You’ll receive one report with findings, photographs, recommendations and what was and wasn’t inspected. Suspect asbestos samples are identified in Airsafe’s own NATA-accredited laboratory (NATA accreditation No. 2959). A non-intrusive inspection cannot rule out materials hidden inside walls, floors or ceilings.
Standard turnaround is 7 business days. Priority turnaround is 3 business days and will incur a 50% surcharge. The surcharge applies to the report fee.
Your job may cost more if any of these apply.
- A house rather than an apartment or townhouse
- More samples
- Travel outside Sydney
- A priority report
- Checking for other hazardous materials, such as lead paint
How much is an asbestos survey for strata common areas or a small commercial building?
Typically from $3,000 including GST.
Most jobs are $2,800 to $4,900.
We may quote less for a smaller building.
For an asbestos survey, our consultant inspects the premises and takes samples of suspect materials. Asbestos samples are tested in Airsafe’s own NATA-accredited laboratory. Your report records the location, extent and condition of asbestos and other hazardous materials found. Multi-level buildings and larger sites are quoted on request.
Standard turnaround is 7 business days. Priority turnaround is 3 business days and will incur a 50% surcharge. The surcharge applies to the report fee.
Your job may cost more if any of these apply.
- More buildings, levels or lots
- A destructive or pre-demolition survey
- Adding a register or management plan
- Checking for other hazardous materials as well as asbestos
- A priority report
What will an asbestos clearance inspection cost?
Typically from $495 including GST.
Most jobs are $495 to $815.
Air monitoring and clearance on the same day are usually $660.
These prices cover non-friable asbestos, firmly bound in materials such as fibro sheeting. We carry out your clearance inspection after licensed asbestos removal, before anyone goes back into the area. We’re independent of the removalist. We check the area visually and carry out air monitoring where required. You receive an Asbestos Clearance Certificate once the area is clean.
Clearance after removal of friable asbestos, which crumbles easily, is quoted on request. Where no laboratory samples are needed, we’ll usually have the inspection done and the certificate signed off the same business day.
Your job may cost more if any of these apply.
- Travel to regional sites
- More than one area or site on the same visit
- Weekend attendance
- Friable asbestos work, quoted on request
How much does an asbestos register cost to prepare or update?
New asbestos register typically from $1,815 including GST.
Most jobs are $1,800 to $3,400.
A register for a smaller site may cost less.
Review or update of an existing register typically from $1,540.
Most reviews or updates are $1,540 to $3,150.
An asbestos management plan added to a register is about $500 extra.
A new asbestos register includes a survey and samples of suspect material, analysed in Airsafe’s own NATA-accredited laboratory. The register records the location, type of asbestos-containing material, classification, condition, accessibility, and recommendations for how the asbestos should be controlled.
We’ll review the existing register, conduct a fresh visual inspection of the asbestos previously identified, and update or rebuild the document as needed. We also review registers prepared by other consultants. Large or multi-site registers are quoted on request.
Your job may cost more if any of these apply.
- Larger buildings or more buildings and sites
- Adding a management plan
- A hazardous materials register rather than asbestos only
- An old register that needs close to a new survey
- Regional travel
What does a residential mould inspection and report cost?
Typically from $1,485 including GST.
Most jobs are $1,500 to $1,990.
The price covers your mould inspection, a written report and two indoor air samples. We check for visible mould and water damage, and take moisture readings to trace the source. An outdoor comparison sample is included. Samples are analysed by an independent NATA-accredited laboratory.
Your report sets out where the mould is, where the moisture is coming from, what the laboratory found, and a scope of works your remediation contractor can quote from. Extra samples and clearance inspections after remediation are quoted separately.
Your job may cost more if any of these apply.
- Extra samples, quoted for the job
- A larger home
- Travel outside Sydney
- Extra testing
How much is asbestos air monitoring per day?
Typically from $550 a weekday including GST.
Weekend monitoring is about $860 a day.
We charge for asbestos air monitoring by the day. Our consultant sets up air monitors in the relevant areas during asbestos removal. Flow rates and air volumes are measured under Airsafe’s NATA accreditation (No. 2959). The fibres on the filters are counted in Airsafe’s own NATA-accredited laboratory.
Night or after-hours shifts are quoted on request. A test report detailing results of asbestos air monitoring is issued within 24 hours.
Your job may cost more if any of these apply.
- Weekend work
- Night or after-hours shifts, quoted on request
- Regional or interstate travel
- Extra laboratory analysis on the same day
- More days of monitoring
Asbestos sample testing
Asbestos sample testing is $110 including GST per sample. It’s the same price per sample whether you’re having one sample tested or 10. Bring or send us your sample. Samples are identified in Airsafe’s own NATA-accredited laboratory. You’ll receive a written result by the next business day after the sample reaches our laboratory.
A quote for your job
Large commercial buildings, multi-building sites, destructive or pre-demolition surveys, friable asbestos work and after-hours work are quoted on request. We quote each job for the property and work involved. A smaller job can cost less than the “from” figure, and a bigger job more. Your quote is confirmed in writing before any work starts. Send us the address, what you’re planning and anything your council or certifier has asked for.
These are the prices we typically charged and quoted for our own jobs in 2026. We last checked them in November 2026, and they all include GST.
Ask us for a Fast Quote. Just call us on 1300 888 338 if you’d like to talk it through.
Frequently asked questions
-
Asbestos testing costs $110 including GST per sample. If you only need one material checked, you can bring or send a sample to our Beaconsfield laboratory. A residential asbestos inspection and report is typically from $1,485 including GST, with a consultant inspecting the agreed accessible areas.
-
A residential mould inspection with a written report is typically from $1,485 including GST. It includes checks for visible mould and water damage, moisture readings, two indoor air samples and an outdoor comparison sample. Your report includes a scope of works for your remediation contractor to quote from. Extra samples are quoted for your job.
-
Your quote may be higher or lower. The “typically from” figures are prices we charge for straightforward jobs. Smaller jobs can cost less, and extra sampling or travel outside Sydney can add to the cost. We’ll quote for your property and the work involved, with written confirmation before work starts.
-
Yes, we offer priority turnaround for asbestos inspection and survey reports. Standard turnaround is 7 business days. Priority turnaround is 3 business days and will incur a 50% surcharge. We apply that surcharge to the report fee.
-
Yes, we work across NSW and travel Australia-wide from Sydney. Travel outside Sydney adds to the cost. Your written quote will show the travel cost for your job, with travel and time included.