Our occupational hygienist is a certified occupational hygienist (COH) with the Australian Institute of Occupational Hygienists (AIOH), a certified industrial hygienist (CIH) with the American Board of Industrial Hygiene (ABIH) and a member of the Australian Institute of Dangerous Goods Consultants (AIDGC).

Airsafe's occupational hygiene professionals anticipate, recognise, evaluate and control workplace and environmental hazards, with a particular emphasis on chemical, physical and biological hazards.

Airborne Contaminants Airborne Contaminants Airsafe conducts monitoring for most airborne contaminants including: Nuisance dusts, toxic dusts, organic dusts Inhalable size fraction and respirable size fraction Toxic gases, irritant gases, asphyxiant gases, motor-vehicle exhaust Solvents and organic vapours Toxic and irritant chemical vapours Odour identification Air monitoring can be used to measure personal exposure to chemicals and dusts by comparing results to published exposure standards.

Chemicals Chemicals Chemicals are classified as dangerous goods, hazardous substances and/or poisons and each of these are regulated in a different way. Airsafe can assist with all aspects of chemical risk assessment and control including: Risk assessments of the use of chemicals, hazardous substances and dangerous goods Assessment of ventilation systems, including local-exhaust ventilation Assessment of personal protective equipment (PPE) requirements including respiratory protection, eye protection, hand protection and protective clothing Classification of dangerous goods, hazardous substances and poisons Preparation of material safety data sheets (MSDS) for chemicals or formulated products Preparation of labels for chemicals or formulated products Identifying chemicals and gathering material safety data sheets (MSDS) for workplace chemical registers Training about chemicals and chemical hazards

Dangerous Goods Dangerous Goods Dangerous good are substances that are explosive, stored under pressure, flammable, highly reactive, poisonous, radioactive or corrosive. Storage and transport of dangerous goods is regulated because of the high risk associated with these substances. Airsafe can advise on the use, storage and transport of dangerous goods including: Audits of dangerous goods storage Planning reports for approval of dangerous-goods storage by local councils Audits of dangerous goods transport Advice on site placarding and site manifests Preparation of emergency response plans Classification of chemical substances and mixtures

Indoor Environment Indoor Environment Indoor air quality has increased in importance as more workers are confined to modern offices with controlled heating, ventilation and air-conditioning systems. Outbreaks of Legionnaires’ Disease are an indication that some of these systems require higher levels of maintenance to ensure a healthy environment. Airsafe offers a range of services to assist with indoor air quality problems including: Monitoring of temperature, humidity, air movement and ventilation rates Monitoring for airborne contaminants in indoor environments Inspection of air-conditioning systems including plant rooms, air-handling units, filters and cooling towers Monitoring for contaminants in drinking water and process water

Hazardous & Toxic Waste Hazardous & Toxic Waste Modern technology has introduced many new processes that require the disposal of hazardous and toxic chemicals. Airsafe can ensure that the demands of environmental protection, worker health and government regulation are fully addressed and fully documented through: Classification of wastes for disposal Identification of unlabelled or unknown chemicals Hazardous material inventories for industrial and commercial sites (operating or vacant)

Heat Stress Heat Stress Thermal comfort is a factor in most workplaces, but in more extreme environments heat stress must be considered. Airsafe can evaluate the risk of heat stress in workplaces and provide: Measurement of heat stress indices Identification of control measures to avoid heat stress

Noise Noise Effective hearing conservation requires noise level measurements, engineering noise control, personal protective equipment, audiometric testing (hearing tests) and worker training. Airsafe can assist at all stages of a hearing conservation programme including: Noise surveys of industrial and commercial premises Calculation or measurement of noise exposure for employees Identification of priority areas for further examination by an acoustic engineer. Advice on the selection of suitable personal hearing protection Referral to organizations who design engineering controls or conduct audiometric testing